Manufacturers and die & mold shops can eliminate chatter problems in various milling operations with Iscar's revolutionary Chatterfree carbide end mills. The cutters' variable-pitch flute pattern annihilates harmonic vibration, the chief source of chatter. This enables faster cutting and excellent finish in rough or finish slotting, shoulder milling and cavity milling. In addition, users also report lasting edge life due to lessened chatter. The chatter-free feature is attainable in both solid carbide endmills and tips in Iscar's Multi-Master replaceable-tip line. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for Multi-Master tips. These brand new endmills are excellent for reduced power machines with ISO40 or BT40 adaptations. The solid carbide version can manage full slot machining up to 2xD. Depth ability on the replaceable-tip version is more constrained since the active length is shorter. In full slotting applications on alloy steel, the solid carbide foundation conveniently handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

Finishred - Innovative Solid Carbide Endmills

Iscar is introducing the EFR.. B44 and the MM EFS.. Finishred a advanced solid carbide end mills family. The Finishred carbide endmill is a combination of both roughing and finishing endmills in a single tool. Roughing endmills remove metal from work pieces more swiftly and adequately than conventional endmills. However, roughing endmills leave grooves on the machined surface. In repercussion, after using a roughing endmill, a finishing endmill has to be used in order to accomplish a smooth surface finish. This demands time-consuming tool change, setup time and inevitably of maintaining two endmill types in the inventory.

Functions of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature 4 flutes with 45 degree helix, two serrated flutes and two continuous flutes.

The cutting edges of the finishing flutes are radially more distant from the tool axis than the cutting edges of the serrated flutes. The finishing flutes dismiss the grooves generated by the roughing flutes, leaving a smooth surface finish.

The tool is fully competent and facilitates running at rough machining parameters, resulting in finish surface quality.

The unique tool design diminishes vibration at high load applications.

The tool creates short and long chips simultaneously. This chip mixture is evacuated more promptly than each individual chip type, an extraordinary solution in slotting and cavity milling functions.

The Finishred is also offered with the Multi-Master indexable milling head option which incorporates the Finishred includes with the benefit of little setup time, no regrinding costs and the ample range of shank and extension choices are obtainable for the Multi-Master milling heads.

A single tool substitutes the roughing and finishing endmills; therefore lowering inventory.

Tool change and setup time can be waived.

An additional tool position is gained on the machine

New Chip Splitting Solid Carbide Endmills for Raised Metal Removal Rates

ISCAR is releasing the ECP-3/4L family of chip splitting endmills. The radical endmills are available with 3 and four 38 degree flutes in grade IC900. They have 2xD and long shanks with reduced neck diameter, which aid machining along high shoulders, at high feeds. These endmills, due to their chip splitting feature and force distribution can be used very efficiently on low power machines (CAT40/BT40/ISO40). The serrated cutting edge includes flat peaks which leave a superior surface finish, in contrast to the current rougher carbide endmills. The ECP endmills are acceptable for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be employed on alloyed steel as well. All of the preliminary tests conducted at numerous customers' locations showed extraordinary results.

Completely New Cutters And Carbide Insert Compositions From Iscar To Better Enhance The Machining Procedure
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

Iscar Offers A Brand New Line Of Slitting Cutters Applying Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Iscar Adds Their Most Recent Innovations To A Extended Line Of Outstanding Hole Producing Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Some Improvements Have Expanded Iscar's Families Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

A Few Of Innovations In Carbide Inserts Due To Iscar Across The Last Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.

Push Pull Testing For Building Industry With Calibrated Gauges. Stress Load Testing Methods For On Site Documentation To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Graduate Career At Land Rover And Jaguar.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.

Commercial Water Heater- Which Is Best For Your Requirements
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.